1] Enable Legacy boot on the BIOS. Power off your computer and turn it back on. Immediately it starts to boot, press F2 repeatedly until the BIOS Setup Utility screen shows up.

How to Do a Master Reset of the BIOS Defaults on a Desktop Computer. Resetting your basic input/output system's settings can take a dead computer and make it work again.

You may need to access the BIOS to make some system changes, but where do you start? Here's how to open BIOS on a Windows 10 ...

Power on your computer and watch for a screen that displays the keyboard shortcut necessary to boot into the BIOS. Tap the keyboard shortcut repeatedly at a 1-second interval until the BIOS setup ...

With just a Raspberry Pi and a few additional components, you don't need an expensive KVM to reap its benefits ...

Then select UEFI Firmware Settings for BIOS settings; The next screen provides an option to restart and access the BIOS setup page; Upon booting, you will be presented with your UEFI settings.

The BIOS setup is accessed at startup. Soon after a PC is turned on, a short screen message typically passes by very quickly indicating which key to press (usually Esc, F1, F12 or Del).

Here is how you access the BIOS settings screen if you are not given the opportunity to do so before Windows 10 starts loading. SEE: Windows 10 spotlight: Prepare, repair, ...

"We're bumping up the resolution of our BIOS interface to 1920×1080. With this change, you’ll be able to see more content at a glance, making it easier to survey the available settings and find ...

Subject says it all. The splash screen at boot says "Press F2 for setup" but I've tried this several times at various times during boot to no avail. I've tried hitting Del, Esc, several of the F ...

In the BIOS Setup screen, select File Tab, and then choose Apply Defaults Save and Exit. This will restart the computer and, hopefully, boot the computer into Windows.